Re: fdb on rmds03

[Luis Bernardo <bernardo@math.lbl.gov>]

On Fri, 4 Sep 1998, jie yang wrote:

> Hi, 
> 
> For further GCA test, I ooattached lots of  
> db files on fdb rmds03::/disk0/grandch/yangj/gctest.fdboot,
> it is about 13Gbytes data there now. Here are 
> some informations about the fdb below:
> 
> FD Name   = gctest
> FD ID     = 30018
> FD File   = rmds03::/disk0/grandch/yangj/gctest.fdb
> Boot File = rmds03.rhic.bnl.gov::/disk0/grandch/yangj/gctest.fdboot
> Jnl Dir   = rmds03::/disk0/grandch/yangj
> Lock Host = rsun00.rhic.bnl.gov
> TagDB Name   = TagDataBase
> HPSSPath=/home/rhstar/olson/objy/db_30018/
> FileSizesList=/disk0/grandch/yangj/filesize.txt 
> IndexDirectory=/disk0/grandch/yangj/index/ 
> 
> Jie
> 
> 

I tried to run a test and I had problems. It seems the index points to non
existent databases. I was using FDB 30018. Jeff, did you have time to fix
FDB 25111?

This is the gc.config I used:

rmds03 % cat bin/gc.config 
common*QEName=HNQueryEstimator
common*QEHost=rmds03.rhic.bnl.gov
common*QMName=QueryMonitor_LB
common*QMHost=rmds03.rhic.bnl.gov
common*CMName=CacheManager_LB
common*CMHost=rmds03.rhic.bnl.gov
common*QERefFile=/tmp/SM_QE_hn.ref
common*QMQERefFile=/tmp/SM_QM_QE_ax.ref
common*QMCMRefFile=/tmp/SM_QM_CM_ax.ref
common*QMEIRefFile=/tmp/SM_QM_EI_ax.ref
common*CMRefFile=/tmp/SM_CM_ax.ref
common*NODAEMON=true
common*VerboseConfig=true
###############################################
#qe*IndexDirectory=/scr20/gc_fdb/26011/index/
qe*IndexDirectory=/disk0/grandch/yangj/index
qe*DataSetDefFile=/disk0/grandch/yangj/index/bin_spec.tdc
#qe*IndexDirectory=/star/u2c/porter/MyTest/Index
#qe*DataSetDefFile=/star/u2c/porter/MyTest/Index/bin_spec.tdc
qe*VerboseConfig=false
#qe*NoQM=defined
###############################################
# Make sure you have "w" permission of the DiskPath directory. NOTE:
DiskPath 
# should be the same as given by Objectivity's filePath function. The CM
needs
# this to check the initial cache (both for files already cached and to
check
# the initial disk available). This requires that all files have the same
# filePath (as given by Objectivity).    
cm*DiskPath=/disk0/grandch/yangj
cm*FreeDisk=800
cm*FdbBoot=/disk0/grandch/yangj/gctest.fdboot
cm*HPSSPath=/home/starreco/30018
cm*HPSSHost=rmds01
cm*HPSSUserName=starreco
cm*HPSSUserPassword=MockData
cm*FileSizesList=filesize.txt
cm*CMLogFile=cmlogfile.txt
cm*PFTPSizeWorks=true
###############################################
qm*FileLimitPerQuery=9999
qm*CMFileSizeToBeChecked=10
qm*EIServer=false
qm*Silence=false
qm*Logging=false
qm*QMLogFile=/tmp/out.qm
qm*SIILogFile=/tmp/out.sii
###############################################

--

And upon running this query:

rmds03 % bin/sii.sol -g bin/gc.config -q "4.9<tot_trans_Mass<10."

the CM crashed with the complaint:

QM asked for disk space left: 800 MBs.
** Error #2164: ociCloseObj(): Object Manager: Attempt to open non-existent
                Database 201
Segmentation fault (core dumped)


----

I checked that the file does not exist:

rmds03 % bin/fid2name 201
Using configuration file "./gc.config".
File FID: 201
** Error #2164: ooHandle(ooDBObj)::hostName(): Object Manager: Attempt to
open
                non-existent Database 201
Host name: 
** Error #2164: ooHandle(ooDBObj)::pathName(): Object Manager: Attempt to
open
                non-existent Database 201
Path name: 
** Error #2164: ooHandle(ooDBObj)::pathName(): Object Manager: Attempt to
open
                non-existent Database 201
Segmentation fault (core dumped)

---

If you see any inconsistency that could explain this let me know.
Thanks,
Luis

	
--------------------------------------------------------------
Luis M. Bernardo  <lmbernardo@lbl.gov> <www.lbl.gov/~bernardo>  
Scientific Data Management Research & Development Group
Lawrence Berkeley National Laboratory         
Berkeley, CA 94720