-----Original Message----- From: Ognian Novakov [mailto:novakov@bnl.gov] Sent: Friday, February 12, 1999 9:40 AM To: Fisyak, Yuri; Garcia-Solis, Edmundo; Morrison, Dave; Flemming Videbaek; Wenaus, Torre; rcfstaff@bnl.gov; Ichihara Takashi; David Zimmerman; Doug Olson; Krzysztof Wozniak; D. McLeod; Jeff Porter; A.K. Holme; Betty McBreen; Mark D. Baker; Adam Trzupek; Pavel Nevski Subject: Correction to the "HPSS PFTP documentation" message Dear All, Please note that the correct PFTP command sequence should be: setpwidth 2 setpblocksize 1048576 psocket i.e. the blocksize should be set to 1 Mb and not to 4 Mb as stated in my earlier message included below! I apologize for causing any possible inconvenience! Regards, Ognian
-- BEGIN included message
- To: "Fisyak, Yuri" <fisyak@bnl.gov>,"Garcia-Solis, Edmundo" <garcia@enp.umd.edu>,"Morrison, Dave" <morrison@bnl.gov>,"Flemming Videbaek" <videbaek@bnl.gov>,"Wenaus, Torre" <wenaus@bnl.gov>,<rcfstaff@bnl.gov>,"Ichihara Takashi" <ichihara@bnl.gov>,"David Zimmerman" <zimm@bnl.gov>,"Doug Olson" <dlolson@lbl.gov>,"Krzysztof Wozniak" <krzysztof.wozniak@ifj.edu.pl>,"D. McLeod" <mcleod@uic.edu>,"Jeff Porter" <porter@bnl.gov>,"A.K. Holme" <A.K.Holme@fys.uio.no>,"Betty McBreen" <mcbreen@bnl.gov>,"Mark D. Baker" <Mark.Baker@bnl.gov>,"Adam Trzupek" <Adam.Trzupek@ifj.edu.pl>,"Pavel Nevski" <nevski@bnl.gov>
- Subject: HPSS PFTP documentation
- From: "Ognian Novakov" <novakov@bnl.gov>
- Date: Fri, 12 Feb 1999 08:07:15 -0800
- Organization: Brookhaven National Laboratory
Attn: HPSS PFTP Users Dear Colleagues, Documentation on how to use PFTP (Parallel FTP) with HPSS is available at http://www.rhic.bnl.gov/RCF/Software/HPSS/index.html - click on Documentation and go to Chapter 3 in the table of contents (for copyright reasons these pages are accessible only within bnl.gov). For HPSS/PFTP related user ID, account, COS, etc., info please contact your RCF liaison person. N.B. After starting a pftp session on your machine and before initiating any transfers you are advised (for better performance) to enter the following sequence of PFTP commands: setpwidth 2 setpblocksize 4194304 psocket Since PFTP reflects to a large extent the HPSS data storage and handling specifics, it is highly recommendable to use PFTP instead of ordinary FTP for data transfers in and out of HPSS. Hope you find the information useful! Regards, Ognianbegin: vcard fn: Ognian Novakov n: Novakov;Ognian org: BNL adr: Brookhaven National Lab, RHIC-RCF;;Bldg. 510 C, P.O. Box 5000;UPTON;NY;11973;USA email;internet: novakov@bnl.gov tel;work: (516) 344-2813 tel;fax: (516) 344-7616 x-mozilla-cpt: ;0 x-mozilla-html: FALSE version: 2.1 end: vcard
-- END included message
begin: vcard fn: Ognian Novakov n: Novakov;Ognian org: BNL adr: Brookhaven National Lab, RHIC-RCF;;Bldg. 510 C, P.O. Box 5000;UPTON;NY;11973;USA email;internet: novakov@bnl.gov tel;work: (516) 344-2813 tel;fax: (516) 344-7616 x-mozilla-cpt: ;0 x-mozilla-html: FALSE version: 2.1 end: vcard