Re: setup for MDC2

[Alex Sim <ASim@lbl.gov>]

Hi,
MDC-2 test starts tomorrow morning, and
the gollowing has been prepared:
Directory: /grandch/u/GCA/MDC2/Launch/bin/TEST_RUN
All the executables, shell scripts and configuration files are in the
directory. 
To avoid possible confusion with other test runs, all the
reference files will be in the same directory, and the following
gc.config
will be used. Make sure that anyone running test between Friday and
Sunday
does NOT use the same port numbers:


################################################################################
common*QEName=QueryEstimator
common*QEHost=rmds03.rhic.bnl.gov
common*QEOrbixPort=1976
common*QMName=QueryMonitor
common*QMHost=rmds03.rhic.bnl.gov
common*QMOrbixPort=1979
common*CMName=CacheManager
common*CMHost=rmds03.rhic.bnl.gov
common*CMOrbixPort=1973
common*QERefFile=./SM_QE.ref
common*QMQERefFile=./SM_QM_QE.ref
common*QMCMRefFile=./SM_QM_CM.ref
common*QMEIRefFile=./SM_QM_EI.ref
common*CMRefFile=./SM_CM.ref
common*EnableDaemon=false
common*NetLoggerHost=rmds03.rhic.bnl.gov
common*NetLoggerPort=3773
common*NetLoggerFile=out.sysperf.log
common*NetLoggerFileFileTracking=out.filetrack.log
common*NetLoggerPortFileTracking=3774
common*VerboseConfig=true
################################################################################
### INDEX directory will be changed Friday morning!
qe*IndexDirectory=/grandch/u/GCA/fd30023/index/IndexData/
qe*DataSetDefFile=/grandch/u/GCA/fd30023/index/IndexData/bin_spec.tdc
qe*VerboseConfig=false
qe*EnableLogging=true
qe*QELogFile=out.qe.log
qe*PrintOIDs=false
qe*EnableRecovery=false
qe*QERecoveryFile=qe.recovery.info
cm*DiskPath=/disk00001/
cm*TotalCacheSize=5000
## FdbBoot directory will be changed Friday morning
cm*FdbBoot=/grandch/u/GCA/fd30023/hij.bootfile
cm*HPSSPath=/home/starreco/gc/
cm*HPSSHostName=rmds01
cm*HPSSUserName=starreco
cm*HPSSUserPassword=MockData
cm*CMListFilesStaged=out.listfilesstaged.log
cm*CMLogFile=out.cm.log
cm*EnableLogging=true
cm*EnableNetLogging=true
cm*EnableRecovery=false
cm*CMRecoveryFile=cm.recovery.info
cm*ReplicateObjyDT=false
################################################################################
qm*FileLimitPerQuery=9999
qm*EIServer=false
qm*Silence=false
qm*EnableLogging=true
qm*EnableNetLogging=true
qm*EnablePolicy=true
qm*QMLogFile=out.qm.log
qm*CMXLogFile=out.cmx.log
qm*SIILogFile=out.sii.log
################################################################################
common*UserLogging=true
common*UserLogFile=out.user.log


Thanks.

-- Alex
__________________________________________
Alex Sim <ASim@lbl.gov> http://sim.lbl.gov
Scientific Data Management Research Group
Lawrence Berkeley National Laboratory